Cut UTG, cover glass and sapphire to tighter tolerances.
Mobile, watch and camera cover glass and sapphire need micron tolerances on thin, brittle material. A picosecond laser cuts and splits UTG, willow glass and sapphire cover from 0.03 mm thick with chipping under 5 microns, and UV internal engraving adds sub-surface branding without touching the surface.
How Gudetech serves consumer electronics / cover glass & sapphire.
Ultra-thin glass and sapphire
Picosecond cutting handles UTG, willow glass and sapphire cover for mobiles, watches and camera and CCTV lenses, from 0.03 mm thick at plus or minus 0.01 mm accuracy.
Edge quality that survives drop tests
Cold cutting leaves no taper, no burrs and chipping of 5 microns or less, protecting edge strength on cover glass that has to survive handling and drops.
Irregular shapes and cutouts
The picosecond laser cuts irregular outlines, camera holes and speaker cutouts at high speed, following shapes that mechanical scoring cannot.
Sub-surface branding
UV internal engraving forms logos and patterns inside clear cover glass and crystal without marking the outer surface, for a clean branded finish.
Built for this work.
Picosecond Glass Cutting & Splitting Machine (Single/Dual Station)
Ultrafast picosecond cutting and splitting for brittle glass, accurate to ±0.01 mm with chipping under 5 microns.
See the machine→
UV Laser Internal Engraving Machine
Engraves 3D patterns, text and logos inside crystal and glass without damaging the surface.
See the machine→
In-line Laser Drilling Machine
No-contact laser drilling for glass production lines, accurate to ±3 microns.
See the machine→Relevant processes.
Picosecond Cutting & Splitting
Cut and split UTG, willow glass and sapphire cover to ±0.01 mm.
Explore picosecond cutting & splitting →UV Internal Engraving
Sub-surface logos and patterns inside clear cover glass.
Explore uv internal engraving →Laser Drilling
Camera and sensor holes with no cracks at micron accuracy.
Explore laser drilling →
Glass our lasers have processed.
A look at the frosting, drilling, marking and cutting our machines turn out for work like yours.
Bring it in-house.
Tell us your material, thickness and outline tolerances, and we will spec the picosecond and engraving cell and send a quote.