Drill glass with no bit, no pressure and no cracks.
Laser drilling opens holes in glass with no drill bit and no mechanical pressure, so there are no burrs and no cracks at the hole. A no-contact process drills irregular shapes that mechanical tools struggle with, and an in-line servo system places each hole to within a few microns at production speed.
Built for laser drilling.
No bit, no mechanical pressure
The laser drills without touching the glass, avoiding the tool-induced cracks that lower yield on mechanical drilling.
Clean holes, no burrs
Holes come out with no burrs and no edge cracking, often ready to use without secondary finishing.
Irregular hole shapes
The beam drills irregular and freeform hole shapes that mechanical drilling cannot easily produce.
Micron accuracy in-line
An in-line servo system places each hole to within plus or minus 3 microns at high speed, and links into a production line.
What it runs on.
The machine for the job.
Laser Drilling Machine
Fiber-laser glass drilling with no drill bit, no mechanical pressure and no water.
View the Laser Drilling Machine →
In-line Laser Drilling Machine
No-contact laser drilling for glass production lines, accurate to ±3 microns.
View the In-line Laser Drilling Machine →
Laser Drilling & Cutout Machine
Single-beam double-head laser drilling and cutout, built for shower-room glass.
View the Laser Drilling & Cutout Machine →Real parts on real glass.
Put laser drilling to work.
Send us your glass type and the result you need. Gudetech engineers will spec the machine and reply with a quote and the process specs for the process running on glass like yours.