Cut, drill and mark automotive glass with no thermal damage.
Automotive glass demands clean edges, accurate sensor and camera cutouts and permanent traceability. A picosecond laser cuts brittle automotive glass cold with chipping under 5 microns, the drilling line opens holes with no cracks, and fiber marking writes permanent part codes for full traceability.
How Gudetech serves automotive glass.
Cold cutting, edges that hold
Picosecond cutting holds plus or minus 0.01 mm accuracy with chipping of 5 microns or less and no taper or burrs, so automotive glass keeps its edge strength.
Sensor, camera and antenna cutouts
No-contact laser drilling and cutout open holes and openings for sensors, cameras and antennas with no burrs and no cracks, at micron accuracy in-line.
Permanent part traceability
Fiber-pulse marking writes permanent serial numbers, QR codes and logos that resist abrasion and tampering, supporting automotive traceability and anti-counterfeiting.
Built for production volume
Single- or dual-station picosecond builds and in-line drilling link into a production line with high-precision servos for hands-off, repeatable throughput.
Built for this work.
Picosecond Glass Cutting & Splitting Machine (Single/Dual Station)
Ultrafast picosecond cutting and splitting for brittle glass, accurate to ±0.01 mm with chipping under 5 microns.
See the machine→
In-line Laser Drilling Machine
No-contact laser drilling for glass production lines, accurate to ±3 microns.
See the machine→
Laser Marking Machine
Fiber-laser marking and engraving on metallic and non-metallic materials, with permanent anti-counterfeiting.
See the machine→Relevant processes.
Picosecond Cutting & Splitting
Cold cutting of brittle automotive glass with chipping under 5 microns.
Explore picosecond cutting & splitting →Laser Drilling
Sensor and camera cutouts with no cracks, micron-accurate in-line.
Explore laser drilling →Laser Marking
Permanent part codes and serials for full traceability.
Explore laser marking →
Glass our lasers have processed.
A look at the frosting, drilling, marking and cutting our machines turn out for work like yours.
Bring it in-house.
Tell us your glass spec, cutout layout and volumes, and we will spec the cutting, drilling and marking line and send a quote.