Laser Engraving & Drilling Machine V3
Gudetech's flagship fiber-laser platform for frosting, coating removal and drilling on glass.
An engineer follows up with firm pricing, and you can book a live online demo · A real engineer replies, not a call center
What is built into the Laser Engraving & Drilling Machine V3.
FEA deep structural optimization
The frame is optimized with finite-element analysis for rigidity and vibration control, holding precision across the full work area at speed.
Gantry dual-rail Y-axis + triple-rail main beam
A gantry with a dual-rail Y-axis and a triple-rail main beam carries the head with high stiffness, keeping the focus stable on large sheets.
Fiber laser with autonomous parameter optimization
The fiber laser source self-tunes its parameters to the job, so frosting, coating removal and drilling each run at their optimal setting without manual trial and error.
High-precision dual-zone water cooling
A two-zone water-cooling system holds the laser and optics at temperature for stable output over long production runs.
Tracking suction + pulse-jet dust collection
A high-efficiency tracking suction head follows the beam, and an electronic pulse-jet dust collector clears glass dust to keep the work area and optics clean.
3 glass processes, one platform.
See the work come off the bed.
Real laser-processed glass from our shop floor. Tell us your part for the Laser Engraving & Drilling Machine V3 and an engineer will follow up with firm pricing and a live online demo.
Sample
Sample
Sample
Sample
Sample
SampleThe full spec.
| Smallest work area | 1225 × 2500 mm (48.2 × 98.4 in) (GDL1225-V3) |
| Largest work area | 3000 × 6000 mm (118.1 × 236.2 in) (GDL3060-V3) |
| Weight | 2800 – 5400 kg |
| Laser source | Fiber, autonomous parameter optimization |
| Laser power | 120 / 180 / 200 W |
| Functions | Frosting / sandblasting, coating removal, drilling |
| Cooling | High-precision dual-zone water cooling |
| Structure | FEA deep-optimized frame |
| Motion | Gantry dual-rail Y-axis + triple-rail main beam |
| Drive | High-capacity servo motors |
| Dust removal | Tracking suction + electronic pulse-jet collector |
| Software | AutoCAD / CorelDRAW / type3 |
| File formats | DXF / AI / SML / JPG |
| Model | X (mm · in) | Y (mm · in) | Structure |
|---|---|---|---|
| GDL1225-V3 | 1225 · 48.2 | 2500 · 98.4 | Gantry |
| GDL1530-V3 | 1500 · 59.1 | 3000 · 118.1 | Gantry |
| GDL2040-V3 | 2000 · 78.7 | 4000 · 157.5 | Gantry |
| GDL3060-V3 | 3000 · 118.1 | 6000 · 236.2 | Gantry |
What it's used for.
Request a quote for the Laser Engraving & Drilling Machine V3.
Tell us your glasstype, thickness and part sizes, and the process you need, and we'll configure the machine and send a quote. Want proof first? Ask an engineer for a live online demo.