Green Laser Sandblasting & Drilling Machine
Cold green-laser processing that frosts, removes coatings and drills glass with no edge breakage.
An engineer follows up with firm pricing, and you can book a live online demo · A real engineer replies, not a call center
What is built into the Green Laser Sandblasting & Drilling Machine.
Cold processing, no breakage
Green-laser cold processing means no edge breakage and no thermal explosion of the glass, protecting yield on sensitive sheets.
Multi-functional integration
Frosting and sandblasting, coating removal and drilling are integrated on a single platform, replacing several separate processes.
Eco-friendly, no consumables
The process uses no sand or chemical consumables, so it saves energy and cost while keeping the shop clean.
Intelligent control for mass production
Intelligent control keeps the process consistent across long runs, making the machine well suited to mass production.
3 glass processes, one platform.
See the work come off the bed.
Real laser-processed glass from our shop floor. Tell us your part for the Green Laser Sandblasting & Drilling Machine and an engineer will follow up with firm pricing and a live online demo.
Sample
Sample
Sample
Sample
Sample
SampleThe full spec.
| Smallest work area | 800 × 1000 mm (31.5 × 39.4 in) (GDL0810-GL) |
| Largest work area | 3000 × 6000 mm (118.1 × 236.2 in) (GDL3060-GL) |
| Weight | 3800 – 6400 kg |
| Laser source | Green laser |
| Laser power | 60 W |
| Processing | Cold (no edge breakage, no explosion) |
| Functions | Frosting / sandblasting, coating removal, drilling |
| Consumables | None (eco / energy-saving) |
| Control | Intelligent, mass-production ready |
| Model | X (mm · in) | Y (mm · in) | Structure |
|---|---|---|---|
| GDL0810-GL | 800 · 31.5 | 1000 · 39.4 | Gantry |
| GDL1530-GL | 1500 · 59.1 | 3000 · 118.1 | Gantry |
| GDL3060-GL | 3000 · 118.1 | 6000 · 236.2 | Gantry |
What it's used for.
Request a quote for the Green Laser Sandblasting & Drilling Machine.
Tell us your glasstype, thickness and part sizes, and the process you need, and we'll configure the machine and send a quote. Want proof first? Ask an engineer for a live online demo.